There’s More than Personal Reasons to Care About the Environment

There’s an old joke which states that of course someone loves the Earth, it’s where he keeps all his stuff. Like many jokes it drives home an important point once you get past the humor. We all have a very good reason to care about the environment. Basically, we’re all here on earth breathing the same air and drinking the same water.

This is one of the larger reasons why any business owner should care about environmentalism. There’s a host of other reasons why one shouldn’t pollute. But first and foremost, it’s best to keep the Earth clean simply because we all depend on it. And there’s a huge amount of evidence at this point that all-natural systems on earth are interconnected to some extent.

For example, consider the case of the North Atlantic Garbage Patch. This giant mass of plastic particles in the Atlantic Ocean comes from all over the world. A plastic bottle thrown onto the side of the road can slowly make its way to a river. And from there it can drift out to poison sea life in the ocean. This is just one example, but it drives home an important point. Every natural system on Earth is interconnected. Damage one part of the environment and one is damaging all of it.

Of course, anyone who’s been subject to a MACT audit can attest that there’s other reasons to be careful about pollution. The MACT standards are a set of metrics which determine whether equipment is considered overly polluting or not. And of course, that also tells whether the equipment exceeds legal limits for environmental contamination.

This is one of the more practical reasons why business owners should build their future on a platform of environmental consideration. One needs to carefully monitor most heavy equipment to ensure emissions are kept within an acceptable range. This isn’t always an easy process though. And good intentions don’t always mean that one will pass a MACT audit.

We can use an example to demonstrate how one can improve his overall chances of success though. We’ll use a business owner in Georgia for our example. This is in large part because a MACT Audit atlanta ga tends to be a bit stricter than most. Areas where people are especially protective of their natural beauty tend to also be a bit stricter about pollution. It’s not a certainty, by any means. But it’s one of those things one can watch out for to improve chances of passing an audit.

But there’s one point more than any other to keep in mind. You should always document any testing procedure which you use with your equipment. You’ll need to keep track of emissions for your own use. And you should also track overall performance and maintenance of your equipment. It’s important to try keeping all of this testing to a set schedule and with unchanging methodology. If you can demonstrate your schedule and methods during an audit than your overall chances of passing will go up immensely. As a general rule, when in doubt document. After all, it’s always better to have an excess of documentation to show an auditor rather than simply providing excuses.…

By Louise B. Delia July 16, 2017 Off

Manage Your Office Supply Closet Life A Pro

If you’re the office manager and responsible for managing all of the supplies in your office, then you know how much of a difficult task that can become. On the surface, managing supplies doesn’t seem like a particularly difficult task, but it can be for a lot of reasons. For starters, there’s a tendency for employees to request more supplies than they actually need. This isn’t just an issue in your office; it’s a problem in companies around the globe. Perhaps it’s human nature or there’s a social reason for why this tends to occur. Needless to say, it’s important to take a proactive approach to managing office supplies.

If your goal is to transform the organization of your supply closet, there are a few ways to do that. You can obtain any type of shelving fort worth tx to ensure there is plenty of space for properly organizing all of the supplies purchased. You can also implement rules regarding how many supplies are ordered. This can be difficult to enforce because it’s hard to police the ordering of supplies. If someone says they need a specific type of sticky note, you might not want to deny that simple request. One way to get around the issue is by implementing clear policies and procedures.

As a general rule, whenever you have guidelines regarding what is and isn’t allowed concerning employees, it’s always best to ensure they are in writing. This will help to ensure you are treating everyone fairly. Sometimes there might be a subconscious tendency to allow some employees to do things that others are not allowed to do for no particular reason, other than perhaps that you work more closely with them. The reason why this issue relates to managing supplies is because everyone should be held to the same standard, otherwise there will be problems. Any policies about what is not acceptable should be communicated, which is a great way to prevent unnecessary frustration.

The logistics of organizing the supply closet is pretty simple. You should ensure all similar items are placed together. If you have large shelves, then there should be plenty of room for all of the supplies ordered. There should be a general rule that any supplies that already exist cannot be ordered for the sake of staying within budget. For instance, blue pens should not be ordered if there is already an abundance of blue pens, unless there is a specific reason why it’s necessary to use a different brand.

Another way to make sure the office supply closet stays organized is by appointing one person to disseminate the supplies on a weekly basis, with exceptions made for when supplies are needed outside of the usual delivery time. While this might sound quite strict, it works, and employees eventually get used to any new rules that are implemented. What’s great about technology is that none of this has to happen manually; there are management systems that can manage what’s ordered and delivered.…

By Louise B. Delia July 13, 2017 Off

Five Factors to Consider while Choosing a Heating Oil Supplier

Industrial heating oil is a more cost effective and a cleaner alternative fuel source. It’s one of the end product of crude oil and has a wide array of applications in industrial boilers and heating units such as furnaces. heating oil wayne nj .If you are in a dilemma as to the preference of heat source during the winter, then you should choose a fuel source that is affordable and one that doesn’t contribute to environmental degradation. The level of cleanliness is such that you can bear the smell or odor emanating while using heating oil. To be used as a fuel source, crude oil goes through an industrial process where crude oil goes through refining and distillation available products such as kerosene, gasoline, and butane. The following factors should help you come to a well informed decision about your ideal heating oil supplier.

Service Package

Industrial suppliers offer a wide range of services in order to boost their businesses as well as maximize their profits. To attract a strong clientele base, most suppliers provide additional incentives. In addition to delivering your fuel source to your premises, they extend other services such as regularly keeping an eye on your fuel source as well as maintenance to ensure you receive the best customer service as well as making sure your fuel source is safe. You should, therefore, look for such services from different suppliers and pick the right choice.

Government Bureau of Statistics

Most governments usually publish different reviews and ratings of varying fuel source suppliers in order of their quality of service. Government statistics is an honest platform where you can select your ideal supplier solely based on public opinion. People usually post their dissatisfaction on certain suppliers in the form of complaints, and others recommend supplies by praising their quality service. Government is a more trustworthy avenue for you to find the best supplier for your heating oil.

Suppliers Reputation

Reputation is what it refers to as the talk of the town in layman’s term. Status is the image that a supplier has created due to the services and credibility of their services. If you are finding a hard time deciding on a long list of suppliers who are the best fit, then you should consider the reputation of every supplier. The supplier whose reputation surpasses the rest is the one you need.

Form of Payment

In the search for a supplier, it is wise to choose a supplier who offers alternative payment plans. A supplier who is flexible with the payment plan that you can afford is the ideal choice. Money speaks volume, and if you choose a supplier who only conforms to one form of payment, will only hurt your pockets and when you lack the payment will leave you out to dry.

Supplier’s interests to a Community

You ought to choose a supplier who is deeply investing in the community you locate. A supplier who has deep investments to the city stands to lose a lot. This factor should help you reach a timely decision on your heating oil supplier.…

By Louise B. Delia February 7, 2017 Off

Safety on the Plant Floor

Anytime a worker is using a grinding, cutting or milling machine the parts of the machine gets hot, especially the parts of the machine that are the friction points between the steel or metal that is being worked on and the drills or cutting part of the milling machine. The friction is one of the causes of heat. How many have seen dragsters racing? At the beginning of the race, the dragsters wait idly until the green light goes on and within milliseconds the wheels start spinning and smoke starts accumulating under the tires because of the amount of excess energy built between the revolutions of the tire to the pavement.

Workshop Heat

Heat is generated causing smoke. The same cause is at work between sticks rubbed together to create fire for a campfire. When steel fabricators use milling machines to make the parts they need for their job the milling machine generates heat, especially the drill or cutting edges. If the miller doesn’t want the two pieces to weld together because of the heat he must apply some form of liquid between the milling machine and the parts being worked on and this will cool the working space. The liquid used is called  milling machine coolant.

Cutting fluids or coolant comes in many forms such as gels, oil-water, or gases. The material and chemical compositions of these kinds of coolants are various. Sometimes the coolant is made from petroleum by products, oil animal fats, or water injected liquids. Coolants of this kind are needed both for manual milling as well as laser type milling, where the machine doing the cutting is a laser arc.

The Effects of Fluids

When a fluid is applied in this way to the milling work the fluid cools the touch points as well as the proximate spaces between the heated points of the milling process, thereby making the work environment much more safe for the worker as well as the general environment of the fabricating environment. In other words, the coolants prevent hazardous accidents from occurring.


A milling machine worker in an industrial workplace will want to have a coolant that performs several key functions. First, the best coolant will keep the temperature stable, not too hot and not too cool. The second characteristic of a good milling coolant is that it will keep the cutting edges of the work environment as well as the milling machine optimally efficient for its maximum lifespan, thereby keeping the costs of the milling to a minimum. Lastly, the coolant will be free from elements that will cause explosions or fires during the milling process.

Advantages of liquids

The liquid coolant has many advantages, but one of the most significant is that the milling process doesn’t have to stop in order to keep the friction points cool, but can continue to work thru the milling process until the work being done is complete without fear of fire or explosions. This is important since the coolant keeps the surface of the work, as well as the general proximity of the workspace and surfaces.…

By Louise B. Delia January 6, 2017 Off